54-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
Tuning in to Categorized Programs
You can listen to programs categorized to the same group one after
another.
In the XM or SIRIUS mode, touch CATEGORY [] or []
to select a desired category.
The first channel of the selected category is tuned.
• If the desired category program is not found, the “--------” is
displayed for 2 seconds, then the receiving program is restored.
Changing the Display
Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or SIRIUS channel. The
unit can display this text information as explained below.
Touch [INFO.] on the XM or SIRIUS mode main screen.
Each time you touch this button, the display changes as shown
below.
XM mode:
SIRIUS mode:
* Channel name, category, title name, etc., are displayed in one screen.
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
XM Radio:
This number is an 8 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
SIRIUS Radio:
This number is a 12-digit numeric number. It is printed on a label found
on the SAT Receiver.
It can also be displayed on the screen of the IVA-D105 in the following
way.
1
While receiving SAT Radio, touch [ NO.] or
[NO. ] to select channel ‘0’ for XM and channel
“255” for SIRIUS.
The unit display the ID number.
2
The unit displays the ID number.
3
To cancel the ID number display, change the
channel.
• You cannot use “O,” “S,” “ I,” or “F” for the ID Number. (XM radio
Receiver only)
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
Storing Channel Presets
1
Touch [PAGE1/3] after selecting a desired band.
The Function Guide is switched.
2
Touch and hold any one of the preset buttons [P-1]
through [P-6] for at least 2 seconds. The selected
channel is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; XM1, XM2 and XM3 or SIRIUS1,
SIRIUS2 and SIRIUS3 ).
• If you store a channel in a preset already being used, the current
channel will be replaced with the new one.
Receiving Stored Channels
1
Touch [PAGE1/3] after selecting a desired band.
The Function Guide is switched.
2
Touch any one of the preset buttons [P-1] through
[P-6] that has your desired satellite channel in
memory.
*
Auxiliary Data
Field
Information
display
+01GB00IVAD105.book Page 54 Monday, January 15, 2007 4:02 AM