Filter
Top Products
44-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
Adjustment Procedure for Dolby
Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
In case of combining the Automatic adjustments, etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
: the following settings can be made for an external audio
processor.
1
Check the Defeat mode is off (page 27), and then
touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [] of AUDIO.
The AUDIO setup screen appears.
3
Touch [] of A.PROCESSOR.
The A.PROCESSOR list screen appears.
4
Touch [] [] or [] of the desired item to
change its setting.
Setting items :
X-OVER / T.CORR / PHASE / G-EQ / P-EQ / MEDIA XPANDER /
BASS SOUND CONT. / DOLBY PLII /REAR FILL / SPEAKER
SELECT / MULTI CH SETUP / SPEAKER SETUP / DVD LEVEL /
PCM MODE / USER PRESET
5
Touch [RETURN] to return to the previous screen.
Setting the Speakers
Setting item : SPEAKER SELECT
Set the connected speaker by touching the respective
[] or [] button.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 48).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
1
2
3
4
5
6
7
Speaker Setup (page 48)
(Turning the speakers to be used on and off and
setting their response)
Adjusting the speaker levels (page 49)
(Adjusting the signal output level to the various
speakers)
Mixing bass sound to the rear channel
(page 49)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
Adjusting the acoustic image (page 49)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
Achieving powerful high volume sound
(page 49)
(Achieving energetic sound with even greater power,
like the sound in a movie theater)
Adjusting the DVD Level (page 50)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
Storing Settings in the Memory (page 50)
(Storing all the settings and adjustments made on the
IVA-D105 (not only the above settings/adjusts) in the
memory)
Following Steps 1 to 5 describe the common procedures for
operating the Audio Processor setting function. For details of
the setting function items, refer to descriptions of respective
items.
BassEngine
FRONT: ON Fixed
REAR: OFF/ON
CENTER: OFF/ON
SUBW.: OFF/ON
A.PROCESSOR
FRONT1: OFF/FULL (Full Range)/TW (Tweeter)
FRONT2: OFF/ON
REAR: OFF/ON
CENTER: OFF/ON
SUBW.: OFF/MONO/STEREO
+01GB00IVAD105.book Page 44 Monday, January 15, 2007 4:02 AM