Alpine IVA-D105 DVD Player User Manual


 
37-EN
+01GB05IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
If an Alpine Ai-NET Auxiliary Input Adapter (KCA-801B) is
connected to the IVA-D105, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to a
portable MP3 player through your car audio system even with a CD
changer connected and playing. The CD changer will automatically
mute when switched to the AUX Input. For further details on how to use
the Alpine KCA-801B, see your authorized Alpine dealer.
Setting item: IN INT. MUTE
Setting content: OFF / ON
The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
Setting item: IN INT. ICON
Setting content: INT / TEL
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
Setting item: REMOTE SENSOR
Setting contents: FRONT / REAR
The touch panel rear monitor sensor has priority over the remote
control sensor. If the rear monitor (connected to the Alpine rear
monitor output via the Monitor control lead) is touched, the
command is executed regardless of the remote control sensor switch
setting. Note, however, that the remote control sensor that has been
set takes priority if it has been 5 seconds since last touching the
panel.
When an optional DVD changer or DVD player is connected, and the
remote control sensor is set to REAR, some soft button operations
( [] STOP, etc.) cannot be performed.
In this case, set the remote control sensor to FRONT.
When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
With an Alpine navigation system connected to the IVA-D105, the voice
guidance of the navigation system will be mixed with the radio or CD
play.
Setting item: NAV. MIX
Setting content: OFF / ON
See “Adjusting NAV. LEVEL:” under “Adjusting the Audio” on
page 27 to set the navigation interruption volume level.
The volume level for voice prompts during navigation guidance is set
by adjusting the its volume while the prompts are announced. When
the announcement finishes, the normal audio volume and the
previous audio screen are restored. The voice prompt volume is
always at or below the current listening volume. If a navigation
announcement cuts in while adjusting the audio level, it always resets
to the current level regardless of the audio level setting.
This setting is effective when NAV.IN of SYSTEM list screen is ON.
Setting item: AUX IN
Setting content: OFF / ON / VCR / GAME / TV / EXT. DVD /
EXTPLYR
OFF is not displayed when the optional DVD player or DVD changer
is connected. During SYSTEM set up, although the AUX name can be
changed, it is not displayed on the SOURCE selection screen.
When OFF is selected, the settings related to AUX cannot be changed
from this unit.
The selected name is displayed on the VISUAL and REAR selection
screen.
Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
Setting the External Device Interrupt Mode
OFF: The volume level can be adjusted in Interrupt mode.
ON: Sound will not be output.
Setting the Interrupt Icon Display
INT: The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal, the telephone icon appears on the display.
Switching the function of the remote
sensor
FRONT: The remote sensor of this unit is effective.
REAR: The remote sensor of the external monitor
connected to AUX OUT of this unit becomes
effective. The remote control operates the
source connected to the AUX OUT terminals.
Setting the Navigation Mode
ON: Navigation source is displayed.
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
Setting the Navigation Interruption
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
Setting the AUX Mode
OFF: AUX source is not displayed.
ON: AUX source is displayed.
+01GB00IVAD105.book Page 37 Monday, January 15, 2007 4:02 AM