Filter
Top Products
22
OSD MENU Description
123 4
80
5005
NETWORK SETUP
IP MODE
NW ENABLE
VIDEO PORT
UPGARDE PORT
STATIC
When DVR system gets an IP address from DHCP
server, the information will display as below:
192.168.153.254
192.168.153.1
00.00.00.00.00.00
NETWORK INFORMATION
IP ADDRESS
SUB NET
GATEWAY
DNS
MAC ADDRESS
192.168.153.100
255.255.255.255
PPPOE:
Point-to-Point Protocol over Ethernet is a
network protocol for encapsulating PPP frames in
Ethernet frames. It is used mainly with ADSL
services. If your network is using ADSL service
connecting to internet, and then, select PPPOE
mode. Use
▲
and
▼
buttons to go up and
down and select
PPPOE
, and then press
or
▼
to make selection.
A message window will
show up as below:
GET IP NOW! WAITING...
When DVR system get an IP address, the
information will display as below:
192.168.153.254
192.095.000.001
00.00.00.00.00.00
NETWORK INFORMATION
IP ADDRESS
SUB NET
GATEWAY
DNS
MAC ADDRESS
CHANGE
000.000.000.000
000.000.000.000
NW ENABLE:
Allow internet remote user to playback or monitor the
channels. Without enabling the network function, the
channels cannot be playback or monitor from remote
site.
i
F 1 is Channel 1 F 2 is Channel 2
F 3 is Channel 3 F 4 is Channel 4
Use
▲
and
▼
buttons to go up and down and
select
NW ENABLE
(network enable), and then
press
or
▼
and
▼
to move to the selection
.
Use
▲
and
▼
buttons to change the selections