Filter
Top Products
39
(4) Video Quality
Select the video quality setting from BEST, HIGH, MEDIUM, GOOD, NORMAL
or LOW.
(5) Auto Record
Enable/disable auto continue recording when interrupted (i.e., power
breakdown, video playback or configuration setup). It continue recording after
10 second of idleness. This is applicable in Always Record mode under
schedule setting.
(6) Audio Record
Enable/disable audio recording. To record sound, make sure the microphone is
connected to the unit
(7) Disk Overwrite Enable
Enable/disable replacing the earliest record when the hard disk space runs out.
By default, the HDD overwrite setting is enabled
(8) Motion Detection
- Motion Camera
Enable/disable the channel number to detect motion.
- Motion Record Time
Set the amount of time (in second) to record when a motion has detected.
- Sensitivity
Set the sensitivity level. The sensitivity is from high, 9~ 2 and low.
8.1.1.3 Alarm/Sensor Setup
(1)
(2)
(3)
(1) Alarm Setup
- Mail Alarm Enable
Enable/disable alarm sending mail when alarm has triggered or motion has
detected.