Filter
Top Products
3
Name Function
(2) Audio In : Input the audio signal from audio output device which it has a
power supply by itself. The audio is embedded with channel 1
i
The audio input device needs to be powered by
external power.
(3) Audio Out : Output the audio signal to a audio out device which it has a power
supply by itself
i
The audio output device needs to be powered by
external power.
(4) CH1 : Input the video camera signal and display it on channel 1
(5) CH2 : Input the video camera signal and display it on channel 2
(6) CH3 : Input the video camera signal and display it on channel 3
(7) CH4 : Input the video camera signal and display it on channel 4
Output the video signal to other vedio output device through BNC
port
(8) Video Out :
The DVR unit support 2 video output ports and you can
only select to output the video either from the VGA OUT or
VIDEO OUT
(9) VGA OUT : Output the video signal to a CRT or LCD monitor
(10) Sensor In &
Alarm Out
: Support up to 4 sensor device and 1 relay device (Relay: 1A @
125V AC/30V DC)
(11) TV-VGA Switch : Switch to select the video output. Make sure to set the video output
before turning on the unit
(12) 12V DC : Connect the power adapter into this port
1.5 Setting Up the DVR Unit
1.5.1 Installing the Hard Disk
The DVR unit allows user to install one hard disk. Before installing the hard disk,
make sure to set the hard disk master jumper setting. Adjust the jumper setting
according to the instructions on the hard disk label.
i
For hard disk spec, please referring to
http://www.avermedia.com/nvd/hardware-recom_eb_c.asp