AVerMedia Technologies EB1304 NET DVR User Manual


 
41
8.1.1.4 Network Setup
(1)
(2)
(3)
(1) IP Mode
- Static IP
Assign a fixed and global IP address for the DVR system
IP: Assign a constant IP address which real IP addresses give from ISP.
Mask: Enter the subnet mask of the IP address which user has assigned to
DVR system.
i
It is a bitmask used to tell how many bits in an octet(s) identify the
subnetwork, and how many bits provide room for host addresses.
Gateway: Enter the network gateway IP address
DNS: Domain Name Server translates domain names (such as
www.abb.com.tw) to IP addresses. It will translate the domain name into IP
address when DVR system request.
- DHCP
Assign the IP address by local DHCP server to DVR system.
i
The Dynamic Host Configuration Protocol (DHCP) is a set of rules
used by a communications device (such as a computer, router or
networking adaptor) to allow the device to request and get an
Internet address from a server which has a list of addresses
available for assignment.
- PPPOE
Point-to-Point Protocol over Ethernet is a network protocol for encapsulating
PPP frames in Ethernet frames. It is used mainly with ADSL services.
(2) Server Port
A port is using for the remote connection. Any port can be assigned as a server
port, except the ports already used by the network services.
(3) DDNS
DDNS (Dynamic Domain Name Service) is a data query service mainly used on
the Internet for translating domain names into Internet addresses. Users can
register their own domain name on http://www.ddns.avers.com.tw. (See