Filter
Top Products
-14-
Helpdesk: 0845 600 4911
3.2.2 Manual tuning of digital channels and storing in the memory
Press the MENU button on your remote control. Select
CHANNEL SETUP by pressing the Right/Left movement
button and confirm your selection with OK button. Select
Digital Manual Tuning tab by pressing the Up/Down
movement buttons and press Right movement button or
OK button to confirm. Digital Manual Tuning menu will
be displayed.
Enter the channel number from the Manual search menu
using the numeric keys if you know the channel number;
if you don’t know the channel number, you can perform
search by using right/left direction buttons. Channel will
appear in the list and be stored in the memory when it is
found. Press MENU button to return to the previous menu
from the manual search menu or press EXIT button to exit the menu.
3.3 Performing Analog channel settings
3.3.1 Automatic tuning of analog channels and storing in the memory
Press the MENU button on your remote
control. Select CHANNEL SETUP by
pressing the Right/Left movement button
and confirm your selection with OK button.
Select Auto Tuning tab by pressing the
Up/Down movement buttons and press
Right movement button or OK button to
confirm. Country Selection menu will be
displayed.
Scroll to the Country Selection tab by
pressing the Up/Down movement buttons
and press Right/Left movement buttons
to select your country. Then, scroll to the
Scan Type tab by pressing the Down movement button and select ATV option
by pressing the Right/Left movement buttons. Press OK button to confirm your
selections. Analog channels are searched and stored automatically. At the same
moment, the progress of auto tuning and the channels stored in the memory are
displayed in the menu. Program Table menu is displayed at the end of the Auto
Tuning.
ADDITIONAL INFORMATION
Please note that Encrypted channels may not be stored after scanning in the Digital
TV channels. If this is the case then you will need to rescan the channels again but
this time change the LIST SCRAMBLED CHANNELS from AUTO to ON:
1 Press Menu.
2 Select Features.
3 Select Digital Features.
4 Select User Interface Options.
5 List Scrambled Channels will show. Change “Auto” setting to “ON”
6 Press Exit button to exit the Menu.
You will need to rescan the digital TV channels:
1 Press Menu.
2 Select Setup.
3 Select Auto Tuning and press the OK button to start the channel scan and
this time store the Scrambled channels.
CHANNEL SETUP
Please select country and scan type, then press OK to start tuning
Country Selection
England
Scan Type
ATV
Select
Back
Exit
Digital Manual Tuning
VHF CH
9
205 MHz
Poor Normal Good
Select
Back
Exit
Frequency