Filter
Top Products
-27-
Helpdesk: 0845 600 4911
movement buttons and confirm your selection with OK button. Block Programme
menu will be displayed. Select the channel you want to block from the Block
Programme menu with Up/Down buttons and confirm with the GREEN button on
your remote control. A lock symbol will appear next to the channel name. When
a blocked channel is selected, the password screen will be displayed and the
channel will not appear until the correct password is entered. If you do not enter the
password, CH BLOCKED will be displayed on the screen. There will also be a lock
symbol next to the blocked channel in the Program Table. Repeat the same steps to
remove the blocking.
4.5.4 Parental Guidance
If it is supported by the broadcaster, this feature allows you to enter an age restriction
between 4 and 18 for the programs broadcasted. If the program to be broadcasted
is over the age restriction you entered, the channel will not be displayed and a
password screen will appear. To view the program, correct password must be
entered. Enter an age limit between 8 and 18 from the Parental Guidance tab in order
to activate this feature.
4.5.5 Panel Lock
If this feature is turned On, the control buttons on your LCD Television will be locked
and will not function. When it is set to off, control buttons will become active.
4.6 Other picture features
4.6.1 Zoom
Press the ZOOM button on your remote control while watching a channel to activate
this feature. The image is zoomed in 3 stages oriented to the centre.
Note 1: Zoom feature is aborted when the channel is changed.
Note 2: Zoom feature is not available in Digital Mode.
4.6.2 Freeze (Freeze picture)
You may freeze the program picture you are watching with this feature. For this, press
the Timeshift button on your remote control. The program picture will freeze until the
same button is pressed a second time. Freeze: On, Freeze: Off OSD will appear
each time you press the Timeshift button.
4.6.3 Picture and Teletext (PAT)
With this feature, you can follow the teletext broadcasts simultaneously with the
current program, provided that the current program contains teletext broadcast. For
this purpose, when you press TXT and then 16:9 buttons in a channel with teletext
broadcasting, the screen will be split into two with the left pane showing the currently
watched program and the right pane will show the Teletext at the same time. In
the event that you wish to exit the PAT mode for any reason, simply press the TXT
button.