Beko 19WLP530HID Flat Panel Television User Manual


  Open as PDF
of 46
 
-7-
Helpdesk: 0845 600 4911
2.3 Stand Removal
If you wish to remove the television stand, please follow these
steps:
• Coveratablewithasofttowel(orotherprotectionto
prevent damage to the TV or table).
• CarefullylaytheTVfrontdownonthetable.
• PositiontheTVtablestandsothatithangsovertheedge
of the table.
• RemovethescrewsthatholdthestandtotheTVorunclipstandbase.
• Removethestand.
• AttachanynewbracketsbeforeliftingTVbackup.
Note: Keep removed stand and screws safely for future use.
2.4 Remote Control Batteries
Open the lid of the battery compartment and make sure that you have placed the
batteries in the correct direction. For this remote control, UM-4, IEC R03 or AAA 1.5V
batteries are suitable.
Do not throw your old batteries into the fire, discard them in a dedicated waste area
for this purpose.
Do not mix used batteries with new ones or different types of batteries together.
The performance of the remote control is reduced at a distance of 8 metres from or
at an angle of 30 degrees beyond the centre of the TV.
 previous next