Beko 19WLP530HID Flat Panel Television User Manual


 
-28-
Helpdesk: 0845 600 4911
5 TELETEXT
Teletext means in short the transmission of various updated information along with
the TV broadcast signal in the form of text and graphics. To be able to receive a
quality teletext broadcast, a good antenna system and a broadcast signal that is not
weak, with no reflections and interference from other channels are required. Even
in a very clear reception, it is normal for some characters or tabs to be lost. Such
conditions will automatically be improved in a short time under normal circumstances.
5.1 Entering the Teletext Mode
In order to switch your television to the teletext broadcast, please press the TXT
button in a program that has a teletext broadcast. To switch back to the television
broadcast, press the TXT button for two consecutive times. Once you have switched
to the teletext broadcast, the initial page that appears will be the index page. 100 In
this page, the titles of the topics in the teletext broadcast and the initial page numbers
will appear.
5.2 Page Selection
To be able to view the page you would like on the screen, type in the number of that
page using the numerical keys. You can see the number you have entered on the left
side of the upper title tab. When you would like to turn the pages one by one, you can
go to the next page pressing the Up/P+ button and to the previous page pressing
the Down/P- button. Press the INFO button to return to the Index page.
5.3 Teletext image in the TV picture (MIX)
With this feature, you can watch the teletext information and the TV broadcast
together. Thus, you can follow the teletext broadcast of the channel while you watch
the TV broadcast. To do this, press TXT button two times consecutively in a channel
with Teletext broadcast.
5.4 Page enlarge button (DOUBLE)
You can view the upper half of the teletext page in an enlarged format by pressing the
DOUBLE button on your remote control. To be able to view the bottom half of the
enlarged page, press the same button for the second time. Once you press the same
button the third time, the page will be restored to its normal size.
5.5 Page Stop (STOP)
Some information is laid out by the broadcasting agency in multiple pages and it is
broadcast in an automatic cycle mode. For example, on a text of four pages, the
pages are indicated with the figures 01, 02, 03 and 04 on the bottom of the page. To
view one of these pages for a longer time, press the STOP button. When you press
the same button again, the cycle continues.
5.6 Subpage selection (SUB)
If the page of text you are viewing contains sub pages the page numbers starting
from 01 appear on the screen. You can switch to the sub pages with the SUB
button. In this case, subpage selection will appear next to the page number in the
upper left corner in 0001 format; you can either directly enter the number of the
subpage you want to display with number keys or select the subpages one by one by
pressing the RED/GREEN buttons. You can exit the sub page by pressing the SUB
button again.