Filter
Top Products
-19-
Helpdesk: 0845 600 4911
3.5.8 Channel List
If you press OK button when no menu is open, Channel
List menu will be displayed on the screen.
You can see all the channels of the current mode while you
are in the Channel List menu, you can select the desired
channel with Up/Down buttons and view it by pressing the
OK button.
CHANNELLİST
Channel 1
Channel 2
Channel 3
Channel 4
Select
Exit
Signal Information
Channel 23 490 Mhz
Exit
Network XX Network
Modulation 2X 64XXX X2/3
Quality 60%
Signal Strength 90%
3.6 Signal Information
This menu gives information about Channel,
Network, Modulation, Signal level and quality.
Press MENU button to enter this menu.
Select Channel Setup menu by pressing
the Right/Left movement buttons. Select
Signal Information tab by pressing the
Down movement button and confirm with
Right movement button or OK button. Signal
Information menu will be displayed.
Note: Signal Information menu will be active
only for Digital broadcasts.
3.7 CA Module (Conditional Access)
In this menu, you can check the CA Module settings. If a CI module is inserted for a
channel that has a scrambled broadcast, then a submenu for that module is opened
and the information for that module is updated.