Filter
Top Products
-20-
Helpdesk: 0845 600 4911
4 THE SETTINGS ON YOUR NEW TELEVISION
4.1 Performing the Sound settings
You may perform Volume settings by using
the V+ or V- buttons on your television or the
VOL+/VOL- buttons on your remote control.
You can perform other Sound settings by
entering the Sound menu. To do this, press the
MENU button on your remote control, select
SOUND menu by pressing the Right/Left
movement buttons and press the OK button.
In this menu, you can select one of the titles for
which you would like to perform an operation.
SOUND
Volume
AVL
Off
Sound Mode
Normal
Equalizer
Select
Back
Exit
4.1.1 AVL (Automatic Volume Limiting)
Television transmitters have different sound levels. This can be noticed from the
different volume levels that can be heard while switching from one program to
another. Using the Right/Left movement buttons, select ON. The AVL (Automatic
Volume Limiting) function maintains the same sound level as you switch from program
to program. Select Off to cancel it.
4.1.2 Sound Mode
If you would like to add some depth to the sound of the program you are watching,
press Right/Left movement buttons to select Normal or Spatial, or SRS for
products with the SRS (optional) feature.
4.1.3 Equalizer
Select the EQUALIZER tab in the Sound
menu and confirm with the OK button. The
Equalizer menu is displayed.
Using the Right/Left movement buttons, you
may select either one of the preset Music,
Sports, Cinema and Speech options which
enhance the sound effect depending on the
feature of the program you are watching or
the User option which you can adjust as you
desire. To adjust the User option, select User
and press the OK button. You can adjust the
frequency levels with the Up/Down movement
buttons. You can select one of the 120Hz,
500Hz, 1.5kHz, 5kHz and 10kHz frequency
bands with Right and Left movement buttons.
Press the MENU button to store the settings
and exit the user option.
Note 1: You can select the equalizer options directly by pressing the ( ) button on
your remote control.
Note 2: The settings you have made in the Sound menu will be stored in the
memory without requiring any other operations.
<
<
EQUALIZER
User
Select
Back
Exit