47
Using the projector
English
Display menu
Function Description
Aspect Ratio
There are several options to set the picture’s aspect ratio depending on your
input source. See "Selecting the aspect ratio" on page 33 for details.
Keystone
Corrects any keystoning of the picture. See "Correcting picture distortion" on
page 26 for details.
Position
Displays the position adjustment page. To move the projected picture, use the
directional arrow keys. The values shown on the lower position of the page
change with every key press you made until they reach their maximum or
minimum. They will return to their factory preset values whenever the projector
is re-started.
This function is only available when the Component 1, Component 2,
or PC signal is selected.
Overscan Adjustment
Conceals the poor picture quality in the four edges. You can also manually press
/ to decide how much to be concealed. Setting 0 means the picture is 100%
displayed. The greater the value, the more portion of the picture is concealed
while the screen remains filled and geometrically accurate.
Color Space
Conversion
See "Changing Color Space" on page 21 for details.
PIP
Turns the PIP window on or off and makes related adjustments. See "Displaying
more than one image source simultaneously" on page 41 for details.
PC & Component
YPbPr Tuning
H. Size
Adjusts the horizontal width of the picture.
Phase
Adjusts the clock phase to reduce picture distortion.
Auto
Adjusts the phase, and frequency automatically
These functions are only available when the
Component 1, Component 2, or PC signal is selected.
Blank Timer
Sets the image blank time when the Blank feature is activated, once elapsed the
image will return to the screen. See "Hiding the image" on page 35 for details.
Test Pattern
Press ENTER to display the grid test pattern. It helps you adjust the image size
and focus and check that the projected image is free of distortion.
The function is only available when the projector detects no input
signal.