Filter
Top Products
49
Using the projector
English
Advanced Setup menu
Function Description
Lamp Settings
Lamp Mode
Selects the projector lamp power among Dual-Brightest, Dual-Reliable and
Single-Alternative modes.
Reset Lamp Timer 1/Reset Lamp Timer 2
Once the lamp is renewed, select Reset to return the lamp timer to "0". See
"Resetting the lamp timer" on page 55 for details.
Equivalent Lamp Hour #1/Equivalent Lamp Hour #2
Shows the lamp hour information. See "Getting to know the lamp hour" on
page 52 for details.
HDMI Settings
Selects an input source type for the HDMI signal. Auto is the default and
recommended setting. You can also manually select the source type. The
different source types carry different standards for the brightness level.
This function is only available when the HDMI signal is selected.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can connect
the projector using a suitable RS-232 cable and update or download the
projector’s firmware. This function is intended for qualified service personnel.
High Altitude Mode
A mode for operation in areas like high altitude or high temperature. See
"Operating in a high altitude environment" on page 40 for details.
Audio Settings
See "Adjusting the sound" on page 36 for details.
Password
Password
Limits use of the projector to only those who know the correct password. See
"Utilizing the password function" on page 23 for details.
Change Password
You will be asked to enter the current password before changing to a new one.
See "Utilizing the password function" on page 23 for details.
Lan Control Settings
See "Controlling the projector through a Lan environment" on page 37 for
details.
Reset All Settings
Returns all settings to the factory preset values.
The following settings will still remain: names of user modes,
Keystone, Language, Projector Position, High Altitude Mode,
Password, and Expert Mode.
Direct Power On
Sets whether to turn the projector directly on without pressing the POWER
key on the projector or ON on the remote control when the projector is
plugged in.
Signal Power On
Sets whether to turn the projector directly on without pressing the POWER
key on the projector or ON on the remote control when the projector is in
standby mode and the signal is feed through the VGA cable.
Expert Mode
The Expert Mode menu is password protected and only accessible by authorized
calibrators. The ISF (Imaging Science Foundation) has developed carefully
crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these
standards to obtain optimal picture quality from BenQ video display devices.
Accordingly, we recommend that setup and calibration be performed by an ISF
certified installation technician.
For more information, please go to www.imagingscience.com or
contact the place you purchased the projector.
I
I
I
I
I
I
I
I