Filter
Top Products
32
SYSTEM CONTROLS AND INDICATORS
&RQWUROV$QG,QGLFDWRUVIP
S
YSTEM CONTROLS AND INDICATORS
EnglishFrançais Español
To set up the remote to control your cable/satellite box
1. Turn on both the 3•2•1 GSX system and your cable/satellite box.
2.
Press and hold CBL-SAT until the remote LED is lit (about five seconds).
3.
Alternately press Channel and CBL-SAT On-Off until your cable/satellite box
turns off.
4.
Press Enter. Check that the remote LED turns off.
5.
Point the remote at your cable/satellite box and press CBL-SAT On-Off. If your cable/
satellite box does not respond, go back to step 2 and try again.
To set up the remote to control your VCR or PVR (for example, TiVo or Replay TV)
1. Turn on both the 3•2•1 GSX system and your VCR/PVR.
2.
AUXAUX
Press and hold AUX until the remote LED is lit (about five seconds).
3.
AUXAUX
Alternately press Channel and AUX On-Off until your VCR/PVR turns off.
4. Press
Enter. Check that the remote LED turns off.
5.
AUXAUX
Point the remote at your VCR/PVR and press AUX On-Off. If your VCR/PVR does not
respond, go back to step 2 and try again.