Filter
Top Products
38
OPERATION
2SHUDWLRQIP
O
PERATION
EnglishFrançais Español
Listening to FM/AM radio
On the 3•2•1 remote, press FM-AM. If the system is off, the radio will turn on to the most
recently selected station.
Tuning to a station
Use the following controls to tune to a radio station.
•
Press FM-AM to switch between the FM and AM bands.
• Press Tune
to tune up the band. Press Tune to tune down the band.
• Press Seek
to go to the previous station. Press Seek to go to the next available
station. Press and hold for rapid tuning. Release to stop at the next available station. To
stop anytime, briefly press Seek
or Seek . To begin seeking again without holding
down the Seek button, briefly press Seek
or Seek as soon as the first seek opera-
tion stops.
• Press the number of a stored station on the remote.
OR
• Press Preset
to select the next stored station. Press Preset to select the previous
stored station.
Note: For information on changing FM/AM-related source settings, see “FM/AM settings menu”
on page 50
.
Storing stations as presets
Using your 3•2•1 remote control you can store up to 20 AM and 20 FM station presets. This
enables you to tune to a favorite station quickly.
1. Tune to the preferred station.
2. Press Enter on the remote to store the station at the next available preset number.
OR
Enter a number on the remote using the numeric buttons. For numbers 1-9, press the
single number button and hold it. For numbers 10-20, press the first number followed
immediately by pressing and holding the second number.
The newly stored preset number appears briefly on the media center display.
Note:
Storing a station to a preset number replaces any station previously stored to that preset.
Erasing a preset
1. Tune to the preset station.
2. Press and hold the 0 button on the remote until the media center display tells you that
the preset is erased.