Filter
Top Products
SYSTEM SETUP
23
SYSTEM SETUP
Dansk Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
Installing the remote control batteries
1. On the back of the remote, slide open the battery compartment (Figure 19).
2. Insert the two supplied AA (IEC-R6) 1.5V batteries, or their equivalent, as shown. Match
the plus (+) and minus (–) marked on the batteries with the plus (+) and minus (–) inside
the battery compartment.
3. Slide the battery compartment cover back into place.
Note:
R
eplace the batteries when the remote control stops operating or its range seems reduced.
Figure 19
Installing the batteries
Battery
compartment
door
(2) AA batteries (IEC-R6)