Filter
Top Products
32
SYSTEM CONTROLS AND INDICATORS
SYSTEM CONTROLS AND INDICATORS
DanskItalianoSvenska DeutschNederlands EnglishFrançais Español
To set up the remote to control your cable/satellite box
1. Turn on both the 3•2•1 system and your cable/satellite box.
2.
Press and hold CBLSAT until the remote LED is lit (about five seconds).
3.
Alternately press Channel and CBLSAT On-Off until your cable/satellite box
turns off.
4.
Press Enter. Check that the remote LED turns off.
5.
Point the remote at your cable/satellite box and press CBLSAT On-Off. If your cable/
satellite box does not respond, go back to step 2 and try again.
To set up the remote to control your VCR or DVR (for example, TiVo or Replay TV)
1. Turn on both the 3•2•1 system and your VCR/DVR.
2.
AUXAUX
Press and hold AUX until the remote LED is lit (about five seconds).
3.
AUXAUX
Alternately press Channel and AUX On-Off until your VCR/DVR turns off.
4. Press
Enter. Check that the remote LED turns off.
5.
AUXAUX
Point the remote at your VCR/DVR and press AUX On-Off. If your VCR/DVR does not
respond, go back to step 2 and try again.