Filter
Top Products
SYSTEM SETUP
9
SYSTEM SETUP
Dansk Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
Selecting locations for your 3•2•1 Series II system components
Use the following guidelines and Figure 2 to choose locations and positions for the compo-
nents of your 3•2•1 home entertainment system.
Note:
While these guidelines are offered to help provide great system performance, you may find
other placement choices that are more convenient and provide the sound you enjoy.
Placing the media center
CAUTION: Do not block any ventilation openings. For reliable operation of the product and to
protect it from overheating, put the product in a position and location that will not interfere with its
proper ventilation. For example, do not place the product on a bed, sofa, or similar surface that
may block the ventilation openings. Do not put it in a built-in system, such as a bookcase or cab-
inet that may keep air from flowing through its ventilation openings.
• Place the media center where nothing obstructs opening the disc tray on its front panel.
• Make sure the media center will be placed close enough to the Acoustimass
®
module and
the speakers so that all the cables will reach.
• Make sure the media center will be placed close enough to additional source devices (TV,
VCR or cable box) so that all the cables will reach.
Note:
Make sure that the front of the media center is unobstructed so that it may receive
IR (infrared) commands from the remote control.
Figure 2
Sample media center and
speaker placement
Right
speaker
Left
speaker
3 ft (1 m)
maximum
3 ft (1 m)
maximum
3 ft (1 m)
minimum
Media center
Note: The speakers are magnetically shielded to prevent interference with the TV screen.