8
SYSTEM SETUP
DanskItalianoSvenska DeutschNederlands EnglishFrançais Español
SYSTEM SETUP
Unpacking
Carefully unpack your system. Save all packing materials, which provide the safest way to
transport your system. Check to be sure your system includes the parts shown in Figure 1.
If any part of the system appears damaged, do not attempt to use it. Notify Bose or your
authorized Bose
®
dealer immediately. For Bose contact information, refer to the address
sheet included in the carton.
WARNING:
To avoid danger of suffocation, keep the plastic bags out of the reach of children.
Figure 1
Contents of the shipping
carton
120 VAC power cord
(U.S./Canada)
115/230 VAC power
cord with adapter
(U.S./Europe)
Your system includes
one of the following
cords:
240 VAC power cord
(Australia)
230 VAC power cord
(Europe)
230 VAC power cord
(U.K./Singapore)
Rubber feet for
speakers
Acoustimass
module
Batteries
Speaker cable
3•2•1 speakers
Media center
Rubber feet for
Acoustimass
module
Antenna stand
FM antenna
Setup and
demo disc
3•2•1 GS speakers
or
Video cable
AM antenna
Stereo cable
Acoustimass
®
module
cable
Your system includes one the
following speaker types:
Remote
control
Note: If you purchased a 3•2•1
GS Series II system, the left and
right speaker cable connectors
will be marked with a “GS”.
Note: Now is a good time to find the serial numbers on the bottom of the media center and
Acoustimass module. Copy these numbers onto your product registration card and in the space
provided on page 7.