Filter
Top Products
SYSTEM SETUP
25
SYSTEM SETUP
Dansk Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
Checking your system setup
Follow these steps when turning on your system for the first time. Be sure to perform step 4
and play the setup DVD. The setup DVD can help you verify that you set up your system cor-
rectly for proper sound performance.
1. Check the following before you continue:
• All cables are connected for the setup you chose.
• The batteries were installed in the remote control.
• The power cord was installed and plugged into a live AC receptacle.
2. Turn on your TV. Use the remote control that came with your TV.
3. Using your TV remote, select the video input on your TV that connects to the
video output of the media center.
Name TV video input used:
• The method of selecting the right video input depends on your TV. Refer to your TV
owner’s guide for help.
4. Play the 3•2•1 setup DVD.
A. Turn on your 3•2•1 system. Point the 3•2•1 remote control at the media center and
press On-Off.
B. Press Eject on the media center control panel.
C. Insert the DVD setup disc into the disc tray.
D. Press Eject again to close the tray. The DVD will automatically begin to play. If it does
not, press the play button (
).
5. Turn off the TV speakers.
• Refer to your TV owner’s guide for help.
• If your TV does not have an option to turn off the internal speakers, you may need to
adjust both the 3•2•1 system volume and your TV volume until you find a level that pro-
duces the desired sound.
• In some TVs, when the internal speakers are turned off, you may need to raise the TV’s
volume level by 75% to 100% in order to hear audio from the 3•2•1 home
entertainment system. See your TV owner’s guide for help.
Note:
Be sure to play the setup DVD, included in the carton with your system, as soon as all the
connections are completed. This will help you verify the connections you have made and confirm
proper sound performance.