Filter
Top Products
Connections on the Back Panel
The back panel is where you’ll find all the physical connections for the DVD Player. You will only use one Video and
one Audio connection at any given time. For instance, if you’re using the Composite Video jack to connect to your TV,
the S-Video and YUV Progressive Scan / Component connectors will be unused.
YUV - Component Video /
Progressive Scan Connectors
Y, Pr/Cr & Pb/Cb connectors for use with TVs
compatible with Component / Progressive
Scan Video.
*AC Power Inlet
Insert the power cord here first.
Then, plug other end to AC Outlet
(~100-230V).
Composite Video Connector
Typical connection. Connect Yellow
cable to TV Video In.
Stereo Analog Audio Connectors
Use White/Red Audio Cable to connect to
Audio In (L/R) of TV or Receiver.
Coaxial Digital Audio Connector
Use special Coaxial Digital Audio Cable to
connect to Digital Receiver.
S-Video Connector
Use special S-Video Cable to connect to TV’s
S-Video In jack.
Back Panel Connectors
10
~100-230V
AC IN
~100-230V
AC IN
ONON
OFFOFF
AC SWITCHAC SWITCH
COAXIALCOAXIAL
LL
RR
VIDEOVIDEO
S-VIDEOS-VIDEO
AUDIO OUTAUDIO OUT
Pb / PbPb / PbYY Pr / CrPr / Cr
PROGRESSIVE SCAN
COMPONENT VIDEO OUT
PROGRESSIVE SCAN
COMPONENT VIDEO OUT
I
O
COAXIALCOAXIAL
LL
RR
VIDEOVIDEO
S-VIDEOS-VIDEO
AUDIO OUTAUDIO OUT
Pb / PbPb / PbYY Pr / CrPr / Cr
PROGRESSIVE SCAN
COMPONENT VIDEO OUT
PROGRESSIVE SCAN
COMPONENT VIDEO OUT
*AC Power Switch
Turns the main power OFF/ON. Must
be set to ON for unit to operate.
* Some modes of the player may vary without Power Switch and power cord is already attached to the player.