Filter
Top Products
1
STOP
To Stop Disc Play
Press the STOP button to stop playback of the disc. With Audio
CDs, VCDs and DVDs, after the STOP button is pressed, the
message HOLD will be displayed. The stop point is now saved
and you can resume playback by pressing PLAY. Press the
STOP key again to reset the play position to the beginning of
the disc. You must press the STOP button twice to access
some functions in the DVD Player Setup Menu.
2
Pausing and Frame to Frame Stepping Disc Play
With DVDs and VCDs, you can pause playback on a still frame
and advance frame to frame stepping with the PAUSE button.
Pressing the PAUSE button again will advance to the next
frame and remain paused. Pressing PLAY will resume back to
normal playback. Sound is muted when the video is paused.
Pressing PAUSE while playing Audio CDs will mute the sound
and hold the play position. Press PAUSE again to resume
playback.
Quick Tips
Screen Saver
When a DVD or Video CD remains paused on a
still frame for an extended length of time -
approximately 5 minutes - the Screen Saver will be
activated.
The Screen Saver guards against damage to your
TV screen, or “screen burn” which could result in
residual images on the TV’s CRT tube.
You can disable the Screen Saver in the DVD
Player Setup. See System Setup Options on
page 31.
If Screen Saver is enabled, you have an additional
option to enable AUTO STANDBY. The player will
go into STANDBY mode if the player if the screen
saver is been active for approximately 20 minutes.
Stopping and Pausing Play
PAUSE
15
1
2
OPEN/CLOSEOPEN/CLOSE
A-B A-B
+
10
+
10
EFFECTSEFFECTS
INTROINTRO
SETUPSETUPPOWERPOWER
TITLETITLE
MENUMENU
GOTOGOTO
DISPLAYDISPLAY
MUTEMUTE
SUBTITLESUBTITLE AUDIOAUDIOANGLEANGLE
ENTERENTER
PBCPBC
PLAYPLAY
STOPSTOP
PAUSEPAUSE
RETURNRETURN
REPEATREPEAT
1/ALL1/ALL
SLOWSLOW
ZOOMZOOMBOOKMARKBOOKMARK
PROGRAMPROGRAM