Filter
Top Products
TroubleshootingInformationHDMI Control FunctionPlaybackConnectionsGetting Started Specications
ENGLISH
2
Setting items
Setting contents
File lter
Selects the le format you
want to play back from
among the les mixed on a
disc.
All : Plays back MP3/WMA/AAC/LPCM/JPEG/DivX
®
les.
Audio : Plays back MP3/WMA/AAC/LPCM les.
Picture : Plays back JPEG les.
Video : Plays back DivX
®
les.
Audio & Picture : Plays back MP3/WMA/AAC/LPCM/JPEG les.
This operation is effective only when playback is stopped.
Setting items
Setting contents
Secondary Video (PIP) Off : Does not display Secondary Video(Picture-In-picture).
1/Xz : Displays the rst Secondary Video.
2/Xz : Displays the second Secondary Video.
X/Xz : Displays the X th Secondary Video.
z： “X” is the number of Secondary Videos recorded and differs
depending on the disc (“Playing Bonus View” vpage 36)
Audio/Video Sync
Correct displaced video-
audio playback timing.
HDMI / Component : Audio output is synchronized to the video output
from the HDMI terminal or component terminals.
S-VIdeo /Video : Audio output is synchronized to the video output from
the S-Video or Video terminals.
Audio Delay Adjust
While viewing video,
manually adjust the time to
delay audio output.
0 ~ 200msec : Use this to adjust the audio output delay time manually.
Vertical Stretch
Extends cinemascope
size video in the vertical
direction.
Off : Displays the source video signal without modication. This should
normally be set to “Off”.
On : Set when viewing cinemascope size video with a combination of
projector and anamorphic lens. Extends the image in the vertical direction
so that the top and bottom black portions disappear.
NOTE
This has no effect with the video and S-Video outputs.
Changing the Playback File Display
Default settings are
underlined.
Making Other Settings
Default settings are underlined.
Setup
You can set the audio mode and change playback les.
You can set various modes during playback. The setting menu is displayed at the top of the screen.
Various Settings
Setting items
Setting contents
BD Audio Mode
Switch BD audio playback
mode.
HD Audio Output : Can view by outputting high quality signals such as
Dolby TrueHD, Dolby Digital Plus, or DTS-HD as its high sound quality
bitstream. Cannot listen to interactive or secondary audio.
Mix Audio Output : Outputs a mix of primary audio/interactive audio/
secondary audio.
NOTE
When “BD Audio Mode” is set to “Mix Audio Output”, DTS-HD 192kHz
audio is decoded to 96kHz.
1
Press .
Displays the currently settable menu.
The display content changes depending on the media being played back. b
2
Select the setting item using , and then press or .
3
Use to select a setting and use to change the setting.
Vertical Stretch
All
Off
BD Audio Mode
Mix Audio Output
File filter
Setting the Audio Mode
Default settings are underlined.