Filter
Top Products
ENGLISH
15
(5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)
VIDEO IN
89
B
Set the “Audio” default setting as shown below.
(See page 51.)
• “PCM Down conversion: “NO” / “YES”
• “Dolby Digital”: “Bitstream” / “PCM”
• “DTS Digital Surround”: “PCM”
Playing DVDs with incorrect settings may result noise that could
damage your ears or speakers.
DVM-4800
TV
Digital audio input
connector (OPTICAL)
Digital audio input
connector (COAXIAL)
VIDEO IN
(6) Connecting to a Stereo Component
DVM-4800
TV
Stereo component
NOTE:
• Use commercially available 75 Ω/ohm pin-plug cord to connect the DVM-4800‘s video out connector to the TV or monitor.