Filter
Top Products
QSD42908 User’s Manual
58
Fig 5.23 Alarm in handling setup
Step 4: Alarm trigger record channel setup
You can select channels to record for each alarm input. In the sub menu, you can use
【ENTER】or【EDIT】key to enable record channel. “旚” means disabled and “ü means enabled.
Note: In order to trigger the channel to record, in “Recording” menu, you must enable
recording and select record type as “Alarm” or other related type. Please refer to chapter 5.12.
Step 5: Schedule for alarm handle method
When an external alarm occurs in the schedule, the DVR will respond according to the
handle methods.
Step 6: Alarm handle method
You can select one or more handle methods: “On Screen Warning”, “Audible Warning”,
“Upload to Center” and “Trigger Alarm Output”.
Description: If “On Screen Warning” is enabled, when an external alarm occurs and the DVR
is in preview mode, the DVR will display the related camera. If you trigger more than one camera,
the DVR will display them one by one every 10 seconds. When the external alarm ends, the DVR
will return to preview mode.
Step 7: Save setup
In “Alarm in Handling” sub menu, press the “Confirm” button to return to “Alarms” menu.
In “Alarms” menu, press “Confirm” button to save the parameters.