Filter
Top Products
QSD42908 User’s Manual
61
Step 6: Save setup
When you finish setup, in the “Alarms” menu, press the “Confirm” button to save all
parameters.
Note: If any schedule is modified, you must reboot the DVR to make it effective.
Exceptions
The exceptions that can currently be handled include: hard disk full, hard disk error, illegal
access, IP address conflict, network failure, and NTSC/PAL difference.
Enter into the “Exceptions” menu as shown in fig 5.26
Fig 5.26 Exceptions setup
Includes the following handle methods:
Audible Warning: the DVR will beep.
Upload to Center: Send exception information to center host PC.
Trigger Alarm Output: trigger local relay output.
You can select more than one handle method.
After you finish setup, press the “Confirm” button to save parameters. Press “Cancel” button
or【ESC】key to abort