Filter
Top Products
QSD42908 User’s Manual
59
Step 8: PTZ Linkage
Move the “Active Frame” to the “PTZ Linkage” button, press【ENTER】key to enter the
“PTZ Linkage” setup menu as shown in fig 5.24
Fig 5.24 PTZ linkage setup
First select a camera, then select one of following PTZ linkage options:
l Preset: Set the flag as “ü” to enable preset, in the preset number edit box and input one
preset number that has been setup already. Please refer to Chapter 5.15 for preset setup.
l Sequence: Set the flag as “ü” to enable sequence and input one sequence number that
has been setup already. Please refer to Chapter 5.15 for sequence setup.
l Cruise: Set the flag as “ü” to enable cruise. Please refer to Chapter 5.15 for cruise setup.
Press “Confirm” button to save and return to “Alarms” menu. Press “Cancel” button or
【ESC】key to abort and return to “Alarms” menu.
Note: Please make sure that the PTZ camera you are using can support preset, sequence and
cruise functions. One external alarm input can trigger many cameras’ PTZ linkage.
Step 9: Copy the parameters to other external alarm input: You can copy the parameters
of current alarm input to other external inputs.
Step 10: Save setup: In “Alarms” menu, press “Confirm” button to save the parameters.
Press “Cancel” button or【ESC】key to abort.