10
Making connectionsDX-32L221A12/DX-40L260A12
Using composite video (good)
To connect a cable or satellite box using composite video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable box.
3 Connect a composite cable ( included) to the Y/VIDEO, L, and R
jacks on the side of your TV and to the composite video and audio
out jacks on the cable or satellite box.
4 Turn on your TV, then turn on the cable or satellite box.
5 Go through the setup wizard on page 18.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not included) to the ANT/CABLE IN jack
on the back of your TV and to the coaxial out jack on the cable or
satellite box.
4 Turn on your TV, then turn on the cable or satellite box.
5 Go through the setup wizard on page 18.
Side of TV
Cable or satellite box
A/V cable
The audio cables are color coded
(white and red) to the L and R audio
jacks.
The video cable (yellow) shares a
jack. with the component Y cable
and goes to the green jack.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
Cable or satellite box
Back of TV
Coaxial cable
DX-32L221A12-DX-40L260A12_11-0101_MAN.book Page 10 Monday, April 18, 2011 1:22 PM