Filter
Top Products
Making connections
11
DX-32L221A12/DX-40L260A12
Connecting an antenna or cable TV (no box)
To connect an antenna or cable TV (no box):
1 Turn off your TV and all connected equipment.
2 Connect a coaxial cable to the ANT/CABLE IN jack on the back of
your TV and to the antenna or cable TV wall jack.
3 Turn on your TV.
4 Go through the setup wizard on page 18.
Connecting a DVD or Blu-ray player
Using HDMI (best)
To connect a DVD or Blu-ray player using HDMI:
1 Make sure that your TV’s power cord is unplugged and the DVD or
Blu-ray player is turned off.
2 Connect an HDMI cable (not included) to an HDMI jack on the
back of your TV and to the HDMI OUT jack on the DVD or Blu-ray
player.
3 Turn on your TV, then turn on the DVD or Blu-ray player.
4 Press INPUT to open the Input Source list.
5 Press
or to highlight HDMI 1 or HDMI 2, then press ENTER.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
Back of TV
Coaxial cable
Note
You can also press HDMI repeatedly to select the
DVD or Blu-ray player.
Back of TV
DVD or Blu-ray player
DX-32L221A12-DX-40L260A12_11-0101_MAN.book Page 11 Monday, April 18, 2011 1:22 PM