Dynex DX-40L260A12 Flat Panel Television User Manual


 
Using the remote control
17
DX-32L221A12/DX-40L260A12
Using the remote control
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AAA batteries into the battery compartment. Make
sure that you match the + and – symbols on the batteries with
the + and – symbols in the battery compartment.
3 Replace the battery cover.
Aiming the remote control
To aim the remote control:
Point the remote control towards the remote sensor on the
front of your TV.
Turning on your TV for the first
time
The first time you turn on your TV, the Setup Wizard opens. The Setup
Wizard guides you through setting up basic settings including the menu
language, time setting, picture mode, TV signal source, and the channel
list.
To set up your TV:
1 Make sure that you have:
Installed the remote control batteries. (See page 17 for
details).
Connected an antenna, cable TV, or satellite TV. (See page 8
or 11 for details.)
Connected the power cord. (See page 8 for details.)
2 Press (power) to turn on your TV. The Choose Your Menu
Language screen opens.
3 Press
or to highlight the language you want, then press
ENTER. The Choose Your Time Setting screen opens.
4 Press
or to highlight Mode, then press or to select
Manual (to set the date and time manually) or Auto (to set the
date and time automatically from a TV signal source based on the
time zone your select).
5 Press
or to highlight Time Zone, then press or to
select your time zone. You can select Pacific, Alaska, Hawaii,
Newfoundland, Atlantic, Eastern, Central, or Mountain.
6 Press
or to highlight Daylight Savings, then press or
to select On (if your viewing area observes Daylight Savings
Time) or Off (if your viewing area does not observe Daylight
Savings Time).
7 If you selected Manual for Mode, set the date by pressing
or
to highlight Time Zone, Daylight Savings, Year, Month, or
Day, then press or to adjust the setting.
8 If you selected Manual for Mode, set the time by pressing
or
to highlight Time, then pressing or to select the hour,
minute, or AM/PM field. Press
or to adjust the setting.
Cautions
Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Menu
Choose Your Menu Language
Español
Move Select Back
Set menu language to English, Français or Español
Français
English
Setup Wizard
Menu
Choose Your Time Setting
Move Select Back
If Automatic, options are automatically set by TV source
Setup Wizard
AutoMode
Time
Day
Month
Year
Daylight Savings
PacicTime Zone
12 : 07 AM
13
Jan
2000
O
DX-32L221A12-DX-40L260A12_11-0101_MAN.book Page 17 Monday, April 18, 2011 1:22 PM