Filter
Top Products
22
Changing channel settingsDX-32L221A12/DX-40L260A12
Playing TV audio only
You can turn off the picture on your TV and listen to the program audio
only.
To play TV audio only:
1 Press MENU. The on-screen menu opens.
2 Press
or to highlight CHANNELS, then press . The
CHANNELS menu opens.
3 Press
or to highlight Audio Only, then press ENTER.
4 Press
or to select On.
5 Press MENU to return to the previous menu, or press EXIT to
close the menu. The picture turns off in approximately 3 to 5
seconds.
Changing channel settings
Automatically scanning for channels
When you scan for channels, your TV searches for channels with signals
and stores the channel information in the channel list. When you press
CH + or CH –, your TV goes to the next or previous channel in the
channel list.
If the TV signal source changes, for example you change from an
outdoor antenna to cable TV (no box), you need to scan for channels.
To automatically scan for channels:
1 Press MENU. The on-screen menu opens.
2 Press
or to highlight CHANNELS, then press . The
CHANNELS menu opens.
3 Press
or to highlight Auto Channel Search, then press
ENTER. The CHANNELS-Choose Your TV Source screen opens.
4 Press
or to highlight Antenna, Cable, or Cable/Satellite
Box, then press ENTER.
• If you are using an antenna for a standard or HD TV signal,
select Antenna.
• If your cable is connected directly to the TV (using no tuner
box), select Cable.
• If your cable is connected to your TV through a tuner box,
select Cable/Satellite Box.
• If you selected Antenna or Cable, your TV searches
automatically for available channels in your area and stores
the channel information in the channel list. This may take
several minutes. While searching, the TV displays a progress
report.
Or,
If you selected Cable/Satellite Box, the channel search is
not necessary.
Notes
• Audio Only works only when the input source is
TV and your TV is receiving a broadcast signal.
• To exit Audio Only mode, press any button.
When you exit Audio Only mode, the Audio
Only option is automatically reset to Off.
Menu Exit
Picture Mode
Backlight
Sharpness
Tint
Color
Brightness
Contrast
Energy Savings
+10
43
0
58
50
50
Move Select Back Exit
Adjust settings to aect picture quality
PICTURE AUDIO SETTINGS CHANNELS
Menu Exit
Auto Channel Search
Auto Zoom
Audio Only
O
On
Channel Strength
Channel Labels
Favorites
Add/Skip Channels
Move Select Back Exit
Adjust channel options
PICTURE AUDIO SETTINGS CHANNELS
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Menu Exit
Picture Mode
Backlight
Sharpness
Tint
Color
Brightness
Contrast
Energy Savings
+10
43
0
58
50
50
Move Select Back Exit
Adjust settings to aect picture quality
PICTURE AUDIO SETTINGS CHANNELS
Menu Exit
Auto Channel Search
Auto Zoom
Audio Only
O
On
Channel Strength
Channel Labels
Favorites
Add/Skip Channels
Move Select Back Exit
Automatically search for channels.
PICTURE AUDIO SETTINGS CHANNELS
Exit
Choose Your TV Source
Exit
Channel scan may take 20+ minutes
Setup Wizard
Cable/Satellite Box
Scanning for digital channels
Cable
Antenna
Digital Channels
Analog Channels
0
0
DX-32L221A12-DX-40L260A12_11-0101_MAN.book Page 22 Monday, April 18, 2011 1:22 PM