Filter
Top Products
21
3 MOUSE AND FRONT PANEL OPERATION
Paragon 264x4/264x2 series DVR supports multiple sources to control the DVR. It can be controlled with a
mouse, the front panel, an EKB500, the handheld remote control, or serial command from RS232 port.
This chapter will cover the basic operation using mouse and front panel.
3.1 GENERAL USB MOUSE OPERATION
3.1.1 How to select a channel / Enable audio
1. In a view consisting of more than one channel, user can select a channel by clicking once on desired
channel screen. The selected screen will be highlighted by white frame.
2. Double clicking on a channel screen will display full screen of this channel.
3. To enable audio out, click audio icon(ex: ) at lower side of the screen. This system can have only
one audio out for one camera at a time. Click this button to select a camera for audio out, or to select
none audio-out mode.
3.1.2 OSD Root Menu
1. Right-click the mouse to obtain DVR control bar (see Figure 3-1 OSD Root Menu ). When you move the
mouse over each icon, the appropriate title will be displayed on top of the control bar.
Figure 3-1 OSD Root Menu
2. Click on any icon to perform that action. These actions are covered in detail in Chapter 4.
3. Click the “X” in the top-right corner to close the DVR control bar.
3.1.3 Operation in Configuration Menu
The Main menu (shown in
Figure 3-2 OSD Menu
) is divided into 3 main sections.
Chapter
3