EverFocus EDSR 110 DVR User Manual


 
104
Example: (Here we open ports for up to 10 clients)
DVR 80 to 80 Both 192.168.1.50 Enable
DVR 1600 to 1610 Both 192.168.1.50 Enable
DVR 37260 to 37270 Both 192.168.1.50 Enable
Note: If your Internet service provider blocks port 80 and you are using a
different port to access the DVR through the DVR’s Network Menu Setup
please open those specific ports in this section of the router.
Note: If you wish to have multiple users log into the DVR please open a range for
the control and data ports on your router. For example if you would only like 4
clients to connect to the DVR open 1600-1603 and 37260 ~ 37263
The following is the address you would type:
http:// IP address of your internet service provider: 8100