Filter
Top Products
29
3.2 Camera Setup Menu
Diagram 3.4
Diagram 3.4 is a screen shot of the CAMERA SETUP MENU. This menu will walk you through
setting up the Camera Recording Speeds, Camera titles, covert modes, and recording quality. In the
CAMERA SETUP MENU the following fields are defined as:
1. TITLE: The title setting allows you to assign a title to each camera input. Each channel
supports a title with up to 12 characters. Press Enter to move to each character and use the Jog
Dial to change the value. The available alphanumeric characters are:
0,1,2,3,4,5,6,7,8,9,
A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,
( ) . , + - / and an empty space.
2. PTZ ID: Select PTZ ID/Address from 001~255 or OFF. OFF is the same as 000. This ID must
match the ID used by the PTZ camera. To change this, simply use the Jog Dial on the DVR.
3. INSTALL/COVERT: For installation of camera, select “ON” to enable a camera, and “OFF”
to disable it. Please make sure to stop recording before making change to INSTALL. For
optimum recording performance, switch any unused camera channels to OFF in this section.
For covert, select “ON” to cover a camera and disable the screen in live mode. However, the
image is recorded, and can be viewed in playback mode. Covert channels will not show up on
the sequence mode. To change these, simply use the Jog Dial on the DVR.