Filter
Top Products
67
4.2 Schedule Recording Setup
Set up the DAY, START time, END time and then turn SET to “ON” in the SCHEDULE SETUP
MENU.
Diagram 4.1
Please refer to SCHEDULE SETUP MENU for setting procedure and more details.
4.3 Event Recording Setup
We will now define two event recording types ALARM and MOTION. After the event recording is
enabled, the DVR will start an event recording when an event occurs. For instance, when motion
activity or alarm action is detected by the DVR it will begin recording at the specific IPS set in the
Event column.
In order to start an event recording, you MUST perform the following:
1. First enable each event (alarm or motion) in its respective menu. For example, you can enable
motion on Camera 2 in the MOTION SETUP MENU as shown below. You can enable multiple
alarm or motion triggers.