EverFocus EDSR 110 DVR User Manual


 
viii
Safety Precautions (1)
Refer all work related to the installation of this product to qualified service personnel or
system installers.
Do not block the ventilation opening or slots on the cover.
Do not drop metallic parts through slots. This could permanently damage the appliance. If
this does happen, turn the power off immediately and contact qualified service personnel for
service.
Do not attempt to disassemble the appliance. There are no user-serviceable parts inside. To
prevent electric shock, do not remove screws or covers. If service is required, contact
qualified service personnel for maintenance. Handle the appliance with care. Do not strike or
shake, as this may damage the appliance.
Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Take
immediate action if the appliance becomes wet. If this does happen, turn the power off and
refer servicing to qualified service personnel. Moisture may damage the appliance and also
cause electric shock.
Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth
to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent
and wipe gently.
Do not overload outlets and extension cords as this may result in a risk of fire or electric
shock.
Do not operate the appliance beyond its specified temperature, humidity or power source
ratings. Do not use the appliance in an extreme environment where high temperature or high
humidity exists. Use the appliance at temperature within indoor type DVR for 32
o
F ~ 104
o
F
and a humidity below 90%. The input power source for this appliance is AC100~240V.