Filter
Top Products
121
14.2 PTZ control
1. Select the PTZ camera from drop-down menu.
2. Select Action Mode you want to use. There are 4 options available: Continuous, Step x10,
Step x5 and Step x1.
3. Use Direction Arrows (up, down, left, right) to move/adjust the focus to your desired
direction and angle.
4. Press Z+ for Zooming In or Z- for Zooming Out.
5. In Focus option, press Near to move the focus closer to the subject or press Far to move the
focus farther from the subject.
6. You can turn on the Iris by pressing Open or turn it off by pressing Close.
8. “Click to Preset Point” helps you to define the preset point you want the camera to look at.
Press Set to confirm, Clear to delete or Jump to jump to a specific point.
9. “Auto Pan” is to define the speed of PTZ camera when moving horizontally. Choose from
Slower, Slow, Normal, Fast to Faster. Press Run to start or Stop to end.
10. “A/B Point Scan” allows you to set a tour between 2 points. Move to the first point by using
direction arrows and press SET A. Then move to the second point by using direction arrows
and press SET B. Press RUN to start A/B Point Scan.