Filter
Top Products
42
DVD+VCR User’s Guide
ALTERNATIVE CABLE BOX HOOKUP
Follow these steps if you have a cable box and
want to be able to watch a second channel while
recording a TV program.
NOTES
•To view cable box channels, set the TV/VCR switch to TV. To watch the DVD+VCR through the RF output,
set the TV/VCR switch to VCR and tune channel 3 or 4 on the cable box.
•With this hookup, you can watch scrambled channels, but you will not be able to record them.
1 CONNECT CABLE TO TV
Connect an RF coaxial cable from
the wall outlet to the “IN (FROM
ANT.)” jack on the back panel of the
DVD+VCR.
2 CONNECT DVD+VCR TO
CABLE BOX
Connect the RF coaxial cable from
the “OUT (TO TV)” jack on the back
panel of the DVD+VCR to the Input
jack on the Cable Box.
3 CONNECT CABLE BOX TO TV
Connect an RF coaxial cable from
the Output jack on the Cable Box to
the “Antenna In” connection on the
back of the TV.
Input
Output
Cable Box
VHF/UHF
TV
From Cable
Wall Outlet
To Cable
Box Input
4 TUNE THE TV
Set the TV to channel 3 or 4,
whichever is used by your cable
box.
5 TUNE CABLE BOX
With all three devices turned on, set
your Cable Box to channel 3 or 4
(whichever is set on the DVD+VCR),
then press SETUP/ENTER.
6 CONNECTION IS COMPLETE!
The “Language/Langue/Idioma”
menu will appear on your television
screen. Please proceed with Auto
Setup on page 3.