Go-Video DVR 4550 DVD VCR Combo User Manual


 
iii
Safety
SAFETY
1. Read Instructions - All the safety and op-
erating instructions should be read be-
fore the product is operated.
2. Retain Instructions - The safety and oper-
ating instructions should be retained for
future reference.
3. Heed Warnings - All warnings on the
product and in the operating instructions
should be adhered to.
4. Follow Instructions - All operating and use
instructions should be followed.
5. Cleaning - Unplug this product from the
wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
6. Attachments - Do not use attachments
not recommended by the product manu-
facturer as they may cause hazards.
7. Water and Moisture - Do not use this
product near water - for example, near a
bathtub, wash bowl, kitchen sink, or laun-
dry tub; in a wet basement; or near a
swimming pool; and the like.
8. Accessories - Do not place this product
on an unstable cart, stand, tripod, bracket,
or table. The product may fall, causing
serious injury to a child or adult, and seri-
ous damage to the product. Use only with
a cart, stand, tripod, bracket, or table rec-
ommended by the manufacturer, or sold
with the product. Any mounting of the
product should follow the manufacturer’s
instructions, and should use a mounting
accessory recommended by the manufac-
turer.
IMPORTANT SAFETY INSTRUCTIONS
or covered. The openings should never
be blocked by placing the product on a
bed, sofa, rug, or other similar surface.
This product should not be placed in a
built-in installation such as a bookcase or
rack unless proper ventilation is provided
or the manufacturer’s instructions have
been adhered to.
11. Power Sources - This product should be
operated only from the type of power
source indicated on the marking label. If
you are not sure of the type of power sup-
ply to your home, consult your product
dealer or local power company. For prod-
ucts intended to operate from battery
power, or other sources, refer to the op-
erating instructions.
12. Grounding or Polarization - This product
may be equipped with a polarized alter-
nating-current line plug (a plug having
one blade wider than the other). This plug
will fit into the power outlet only one way.
This is a safety feature. If you are unable
to insert the plug fully into the outlet, try
reversing the plug. If the plug should still
fail to fit, contact your electrician to re-
place your obsolete outlet. Do not de-
feat the safety purpose of the polarized
plug.
13. Power-Cord Protection - Power-supply
cords should be routed so that they are
not likely to be walked on or pinched by
items placed upon or against them, pay-
ing particular attention to cords at plugs,
convenience receptacles, and the point
where they exit from the product.
14. Protective Attachment Plug - The prod-
uct is equipped with an attachment plug
having overload protection. This is a
safety feature. See Instruction Manual for
replacement or resetting of protective de-
vice. If replacement of the plug is re-
quired, be sure the service technician has
used a replacement plug specified by the
manufacturer that has the same overload
protection as the original plug.
15. Outdoor Antenna Grounding - If an out-
side antenna or cable system is connected
to the product, be sure the antenna or
cable system is grounded so as to pro-
vide some protection against voltage
surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/
NFPA 70, provides information with re-
PORTABLE CART WARNING
(Symbol provided by RETAC)
9. A product and cart combi-
nation should be moved
with care. Quick stops, ex-
cessive force, and uneven
surfaces may cause the
product and cart combina-
tion to overturn.
10. Ventilation - Slots and openings in the
cabinet are provided for ventilation and
to ensure reliable operation of the prod-
uct and to protect it from overheating,
and these openings must not be blocked