Filter
Top Products
57
Appendix C - Advanced DVD Setup
STILL MODE/BLACK LEVEL
Follow these steps to set Still Mode (the method
used to freeze a single image) and Black Level (the
reference level for black in the video signal).
1 OPEN “SETUP MENU”
Press SETUP/ENTER.
• Make sure the DVD deck is stopped
before pressing SETUP/ENTER. You will
not be able to enter the “DVD Setup”
menu if a DVD is playing.
2 SELECT “DVD SETUP”
Use the UP/DOWN arrow keys to select
“DVD Setup,” then press the RIGHT arrow
key to select.
3 SET “STILL MODE/BLACK LEVEL’
Use the UP/DOWN arrow keys to select and
set the following:
Still Mode
Auto – Selects “Still Mode” automati-
cally by detecting motion in the scene.
Frame – Select if you want to see fine
text more clearly than in Auto mode.
Field – Select if the screen shakes in
Auto mode.
Black Level
High – Selects standard NTSC reference
black level for consistent brightness/
contrast across all sources.
Low – Selects enhanced black level for
increased contrast when viewing DVDs.
press
SETUP MENU
Set Timer Recording
Child Lock Off
Set Clock
DVD Setup
VCR & Channel Setup
Language/Langue/Idioma
/ To Move
To Select
RETURN to Quit
To Move
DVD SETUP
TV Aspect Ratio 4:3PS
Language/Audio Setup
Rating Control [None]
Still Mode Auto
Black Level Low
Alt Video Out Off
/
To Select
RETURN to Go Back
Select "DVD Setup"
Select "Still Mode"
"Black Level"
SETUP
/ENTER