Filter
Top Products
8
Dual-Deck VCR User’s Guide
FRONT PANEL DISPLAY
1 DECK 1 STATUS INDICATOR
Lights to show you that Deck 1 is
active. Also, graphically displays the
status of the tape in Deck 1; e.g.,
Stop, Play, Rewind, etc.
2 TV/VCR INDICATOR
Lights when the Dual-Deck is in VCR
mode, turns off when the Dual-Deck
is in TV mode, as set by the TV/VCR
key.
3 TIMER INDICATOR
Lights to show you that a Timer
Recording has been programmed
and stored in memory. Blinks if
there is a Timer Recording error.
4 COPY INDICATOR
Lights to show you that a tape is
being copied.
5 SAP INDICATOR
Lights when a Second Audio
Program, usually a second lan-
guage, is available for the current
TV channel.
6 Hi-Fi INDICATOR
Lights when a tape is playing a Hi-Fi
stereo soundtrack.
7 STEREO INDICATOR
Lights when the channel you are
watching is broadcast in stereo.
8 DECK 2 STATUS INDICATOR
Lights to show you that Deck 2 is
active. Also, graphically displays the
status of the tape in Deck 2; e.g.,
Stop, Play, Rewind, etc.
9 DECK 1 PLAY/RECORD
SPEED
Shows you the current playback (SP,
LP, or SLP) or record speed (SP or
SLP) for Deck 1.
10 TAPE COUNTER
Shows you the current time, the
tape counter position, or the time
remaining until the end of the tape
in the active deck, as set by the
CLK/CTR key. Also briefly displays
the status of the active deck when
you press a deck control key; e.g.,
STOP , PLAY , REWIND , etc.
11 AM/PM INDICATOR
Lights when the time is A.M., turns
off when the time is P.M.
12 DECK 2 PLAY/RECORD
SPEED
Shows you the current playback (SP,
LP, or SLP) or record speed (SP or
SLP) for Deck 2.
The following is an overview of the front panel
display.
DECK 1
S L P
S L P
DECK 2VCR
AM
TIMER
COPY
SAP STEREOHi-Fi
1234
5
67 8
91011
12