8
Getting started04
9
Getting started 04
Usually, the search will take between two and five minutes, depending on the digital
TV service in your area. In some areas it may take longer (five to seven minutes).
As channels are found, their names are listed on the TV screen.
When the scan has finished, the digital box will automatically switch to the first
channel in the list.
The receiver may pick up channels from
more than one region and you will be asked
to select the region you want to watch
channels from.
• P
ress [p] and [q] to select and [OK]
to choose.
You can now explore and enjoy the channels available on your digital TV service.
4
Inserting USB flash devices
You can insert a USB device at any time.
Recommended USB flash device: USB2.0 HS (high speed) formatted as FAT32 is
compatible and should be used to ensure the best user experience. Please insert a
suitable device. Read the ‘Compatible devices and formats’ section on page 33.
First make sure the digital box is positioned over a stable and even surface.
Insert the flash device into one of the USB ports labelled [•], [••] and [•••].
Look at the image below for guidance.
After a few seconds the green light next to the port should turn on indicating the
USB device has been inserted correctly and is in ‘ready’ status.
You can now record, play and copy to this device.
If the light does not turn on, the device is faulty, unformatted or is not a suitable
device.
Don’t Forget! When inserting a USB
device you may want to place one hand
on top of the digital box to ensure it
doesn’t move.