Filter
Top Products
25
Hookups and Settings
20Press ENTER.
The Setup Display for the DTS signal appears.
21Select whether or not you wish to send a
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amplifier (receiver) has a DTS
decoder, select “On.” Otherwise, select “Off.”
22Press ENTER when “Finish” appears.
Easy Setup is finished. All connections and
setup operations are complete.
To return to the previous step
Press O RETURN.
z Hints
• If your AV amplifier (receiver) has an MPEG audio
decoder, set “MPEG” to “MPEG” (page 92).
• If you want to run Easy Setup again, select “Easy
Setup” in the Setup Display (page 98).
Note
To record TV programmes using the timer, you must set
the clock accurately.
Audio Connection 9/9
DTS
On
Off
EASY SETUP
EASY SETUP
Easy Setup is finished.
Finish