Filter
Top Products
FRONT PANEL INFORMATION DISPLAY 11
ENGLISH
Front Panel Information Display
L Video Output Indicators: Either the 576i
or 576p indicator will light to indicate whether
the Component Video Outputs are in progressive
scan mode. When the Composite or S-Video
Outputs are in use, this indicator will always
indicate the default 576i (interlaced scan) set-
ting, even if you attempt to change the Output
Resolution setting in the Video Setup menu to a
higher video resolution. When the HDMI Output
is in use, its video resolution will be indicated.
The HDMI Output will upscale source materials
to the higher resolution, as indicated in the
VIDEO SETUP menu (explained in the Initial
Setup section). You may change the Video Out
Resolution setting to a lower resolution to
improve picture quality using the VIDEO SETUP
menu. As you select a specific HDMI Output
video resolution and the DMC 1000 successfully
determines that the video display is capable of
handling that resolution, its indicator will light
and will appear briefly in the Message Display
and on screen.
M Angle Indicator: This indicator blinks when
alternative viewing angles are available on the
DVD currently playing.
N Parental Lock Indicator: This indicator
lights when the parental-lock system is engaged
in order to prevent anyone from changing the
rating level without a code.
2083124_HK_DMC_1000_OM_ENG.qxp:34241_DMC250_ENG 15/08/08 10:49 Side 11