Filter
Top Products
TERMINOLOGY 5
ENGLISH
Terminology
RGB Video: This is a new form of video signal
that eliminates many of the artifacts of
traditional composite video signals by splitting
the signal into the three fundamental colors
Red, Green and Blue (RGB). With an RGB con-
nection (via SCART), you will see greater picture
resolution and eliminate many picture
imperfections such as the moiré patterns often
seen on checkered patterned cloths. However, in
order to benefit from RGB video, you must have
a video display with an RGB compatible SCART
input.
Progressive Scan: Due to the immense data
storage capacity of DVD, images are nowadays
stored progressively (intact, rather than
interlaced). This allow all of the lines in each
frame (odd and even) to be shown at the same
time. DMC 1000 comes with true progressive
scan video output resulting in a 40% greater
light output than a conventional TV and a stun-
ningly detailed, high definition image with
absence of visible scanlines and motion artifacts.
WMA Files: WMA (Windows Media
®
Audio) is
an audio compression format that was devel-
oped by the Microsoft
®
Corporation for use with
its Windows Media Player. WMA files can be
even smaller in size than MP3 files, while main-
taining similar quality. The DMC 1000 is among
those DVD players capable of playing discs con-
taining WMA files. Note that Windows Media
Player uses other file formats; however, the DMC
1000 is only capable of playing files that end in
the “.wma” extension. See page 27 for more
information on WMA file support.
Multiple Angle: DVDs have the capability to
show up to four different views of the same
scene in a program. When a disc is encoded with
multiple-angle information, pressing the Angle
button will enable you to switch between these
different views. Note that at present, few discs
take advantage of this capability and, when they
do, the multiple-angle technology may only be
present for short periods of time within the disc.
Producers will usually insert some sort of icon or
graphic in the picture to alert you to the
availability of multiple viewing angles.
Reading: This is a message that you will see
after you´ve loaded the disc and the tray has
closed. It refers to the fact that the player must
first examine the contents of the disc to see if it
is a CD or DVD, and then extract the information
about the type of material on the disc, such as
languages, aspect ratios, subtitles, number of
titles and more. The slight delay while the
contents of the disc are read is normal.
Resume: The operation of the Stop Button on
the DVD works differently from what you are
used to on CD players. On a traditional CD
player, when you press the Stop button, the unit
does just that: it stops playback. On a CD player,
when you press the start button again, the disc
starts from the beginning. With the DVD,
however, you have two options when playing
DVD discs. Pressing Stop once will stop play-
back, but it actually puts the unit in the Resume
mode. This means that you can turn the machine
off and, when you press play the next time, the
disc will resume or continue from the point on
the disc where the Stop button was pressed. This
is helpful if you are watching a movie and must
interrupt your viewing session but wish to pick
up where you left off. Pressing the Stop button
twice will stop the machine in a traditional
manner and, when the disc is played again, it
will start from the beginning.
In resume mode, the cover of the DVD will be
displayed, if available. Otherwise, the
Harman Kardon screen will appear.
2083124_HK_DMC_1000_OM_ENG.qxp:34241_DMC250_ENG 15/08/08 10:49 Side 5