Filter
Top Products
32 HP LCD HDTV User’s Guide
Setting Standby Mode
This option sets the TV mode for standby.
Standby Mode may be set to Mode 1, which starts the
TV quickly from standby, or to Mode 2, which
conserves energy while on standby.
Setting Language
This option sets the OSD language; choose English,
French, or Spanish.
Using Reset
To return Setup options to the factory preset values,
highlight Reset and press OK, and then highlight Yes
and press OK.
Using Reset does not change the Channel Setup, the
Parental CTRL password, or the Language settings.
Using the Option Menu
The Option menu items shown depend on the current
input source:
■ HDMI Setup sets options for the device
connected to Input 4 and Input 5: Signal Type,
Audio Select, and Auto View.
■ Audio Only, when set to On, turns off the video
to the display and only audio is output. Use this
setting to hear audio only when listening to music
from a music program.
■ Digital Noise Reduction, when set to High or
Low, minimizes analog noise or interference on an
analog channel.
■ Input Select sets the default type of signal or
connectors for the device connected to Input 1 or
Input 2.
For Input 1 and Input 2, you can select Auto,
Component, or Video.
■ Output Select selects what controls the audio
output:
Fixed, the default setting, provides a constant
volume level to the Audio Out terminals, and the
speakers adjust using the Volume buttons.
Variable provides a volume level to the Audio
Out terminals controlled by the TV volume; as you
adjust the TV volume, the volume level to the
external system also adjusts. Speakers are muted.
■ Quick Shoot, when set to On, provides a
clearer image for fast-action video. If video noise
occurs, set the function to Off.
■ Caption Setup selects options for Closed
Caption; refer to “Using Closed Caption” on
page 34.
■ Color System, selects the optimum color system:
Auto, NTSC, PAL-M, or PAL-N. Choose the video
signal system compatible with your equipment.
■ Title Display Type, when set to No, does not
show program information when you change the
channel.
HDMI
Setup Selectable items
Signal
Type
RGB/YCbCr 4:4:4/
YCbCr 4:2:2
Select the signal type from an
HDMI terminal.
Auto
View
Enable/Disable
Set whether or not to use Aspect
based on signal recognition,
including an HDMI signal.
Audio
Select
Digital (HDMI)/Analog (R and L
audio)
This setting applies to Input 4
only.