Filter
Top Products
END OF SET UP
1. A screen telling you that TV GUIDE Plus+ will be ready for use within 24
hours appears. Make sure that you turn the cable box ON and the VCR OFF.
NOTE:
If you have a system with a cable box, make sure you change the VCR channel back
to where you normally watch or record from the cable box (typically Channel 03 or 04).
2. Press the SELECT button to return to the TV GUIDE Plus+ options menu.
3. Press the EXIT button to exit Setup.
TV GUIDE Plus+ Setup
Your TV GUIDE Plus+ will be
ready for use within 24 hours.
Always leave your cable box
ON and your VCR OFF.
4. If you have a cable box turn the TV off.
5. The TV will begin searching for the channel that contains the TV GUIDE Plus+ data (host channel). When it locates the
host channel, it starts to download the Setup Information. This download usually takes less than 15 minutes. However,
on some cable systems, this download may take as much as three hours.
6. If you have a cable box, you should allow the TV to control your cable box until Host Search and data Download are
complete.
NOTES: 1) If you do not have a cable box, you can watch TV while the Host Search and Channel Map Download are in
progress. PIP, however, will not be available until the Host Search and Channel Map Download are complete
because the TV uses the PIP tuner to receive the TV GUIDE Plus+ information. Also, note that TV GUIDE
Plus+ will not be available until Host Search and download functions are complete.
2) For TV GUIDE Plus+ to download Program Information, the TV must be off, regardless of TV GUIDE Plus+
settings.
21