Filter
Top Products
English - 29
English
NICAM programs are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language). NICAM programs are always
accompanied by a standard mono sound broadcast
and you can select the desired sound by setting
NICAM on or off.
With the unit in stop mode, press the
MENU button on the remote.
Select “Setup” using 34 buttons, then
press the 1 or OK button.
Using the 34 buttons, move the
selection bar to “System” then press 1
or OK to select.
Using the 34 buttons, move the
selection bar to “NICAM” then press 1
or OK to select.
Using the 34 and OK buttons, select
“On” or “Off”.
• Off: Only set at this position to record the standard
mono sound during a NICAM broadcast if the
stereo sound is distorted due to inferior
reception conditions.
• On: NICAM mode
5
4
3
2
1
Select CM Skip Time using the 34
buttons, then press the 1 or OK button.
Select the desired time using the 34
buttons, then press the 1 or OK button.
If you press the CM SKIP button, the
section corresponding to the set time is
skipped, and then the next section is
played.
■ CM Skip can be performed only during normal
playback.
■ When the time set is less than a remaining time
of a current title:The next title is played from the
beginning.
■ When the time set is less than a remaining time
of a play list, the next scene is played.
■ CM Skip is not performed with respect to a still
picture.
■ When a set time is less than a remaining time of
a scene, a last title, or a last track that is dis-
played currently, a prohibition mark appears.
■ When the time set is less than the remaining time
of the currently displayed track, title or scene, a
prohibition mark appears.
■ CM Skip releases Repeat (including Repeat A-B,
Chapter, and Title).
■ This may not operate with some DVD-Video
discs.
NOTE
6
5
4
Setting Up NICAM
Options
RETURNOKMOVE EXIT
System
DVD-RAM(VR)
Clock Set
Install
CM Skip Time
: 15 Sec
AV1 Output :Video
NICAM : On
RETURNOKMOVE EXIT
System
DVD-RAM(VR)
Clock Set
Install
CM Skip Time : 15 Sec
AV1 Output :Video
NICAM : On
15 Sec
30 Sec
60 Sec
RETURNOKMOVE EXIT
Setup
DVD-RAM(VR)
System
√
Language
√
Audio
√
Video
√
Parental Control
√
RETURNOKMOVE EXIT
System
DVD-RAM(VR)
Clock Set
Install
CM Skip Time : 15 Sec
AV 1 Output : Video
NICAM : On
CM Skip